Alternative Biomedical Solutions sells a complete line of Quality Refurbished Olympus Chemistry Immuno Systems.

When you purchase from ABS you get:

- Quality Refurbished Systems at Significant 

   Savings

- Installation and onsite Operator Training

- Warranty – 12 months parts, labor & travel

- Technical Support

- Onsite Response – 24 to 48 hour

- Options – 24/7 and Business Hours

Analytical system

Fully automated, for routine, STAT, urine and homogeneous Immuno Assays

Analytical methods

Clinical chemistry and immunological parameters. End point, kinetic assays, fixed-time-kinetics, optionally ISE

Simultaneously processed analytes

Up to 48 photometric tests + 3 ISE

Throughput

Up to 1,600 photometric tests/hour; ISE: 270 samples /hour

Sample feeder

Racks with 10 samples each (bar-codes on primary tubes and on racks); capacity of 300 samples; continuous loading

Sample tubes

In primary and secondary tubes; diameter from 11.5 to 16 mm; height from 55 to 102 mm

STAT samples

Up to 22 positions for STAT samples, bar-coded primary tubes

Sample volume

1.6 – 25 µl in 0.1 µl steps (1 µl for repeats)

Reagent supply

Refrigerated (4 °C – 12 °C); 48 positions for R1; 48 positions for R2

Reagent volume

1. reagent: 15 – 250 µl; 2. reagent: 15 – 250 µl

Total reaction volume

120– 400 µl

Reaction cuvette

Quartz cuvettes

Reaction time

Up to 8 minutes, 22 seconds

Reaction temperature

37 °C; Mixing method With rotating paddles after dispensing sample and reagent

Photometry system

Direct assay through the reaction cuvette (0 – 2.5 OD) mono-, bichromatic measurements possible

Wave length

13 different wave lengths between 340 – 800 nm

Cuvette cleaning

Comprehensive cleaning with detergents

Calibration

Linear and non linear (linear interpolation), refrigerated calibrator positions

Data processing

Calculated parameters, blank value correction and correlation. Definition of normal value range, measuring range, pathological values and repeats. Quality controls, printout of abnormal values, pending sample work list and repeat run sample list

Test requisition

Individual and profile test requisition via on-line, mouse, function keys or optional touch screen

Safety

Clot detection and crash prevention for sample and reagent dispenser

On-line

Full uni- and bidirectional communication possible

Software

Windows-NT®; Modem capability

Dimensions (W x H x D) mm

ANL: 2,000 x 1,000 x 840; DPR: 700 x 1,430 x 700